Wholesale Electric Guitars for B2B and OEM Programs

Browse ST-Style and Dual-Humbucker Electric Guitars

BeatBulk’s current electric guitar range supports two clearly differentiated purchasing directions:

• ST-style HSS electric guitars combining a bridge humbucker with middle and neck single-coil pickups and a five-way selector.
• T-style HH electric guitars using two humbuckers with a simpler three-way selector and one-volume, one-tone control layout.

Browse the complete wholesale guitar category for all guitar programs. Buyers requiring unplugged instruments built around soundboard and body construction can continue to wholesale acoustic guitars.

Procurement teams building mixed instrument ranges can also review the musical instruments list and current product catalog downloads.

Compare Current Electric Guitar Platforms

These platforms are differentiated by pickup layout, switching system, and body format—not color alone. Final scale length, fret count, bridge specification, nut width, fingerboard radius, and unit weight should be confirmed for the selected model.

An ST-Style Body Is a Platform, Not a Complete Specification

“ST-style” describes a familiar double-cutaway solid-body format. It does not define the complete instrument. Two ST-style electric guitars can use different neck joints, scales, pickup routes, bridges, control circuits, and hardware.

ST-style and T-style are general platform descriptions. They do not indicate affiliation with a third-party guitar brand.

Choose the Pickup Configuration by Product Role

Pickup configuration affects the available sounds, selector layout, body routing, and intended market position. Pickup codes in this guide are written from the bridge position to the neck position.

SSS: Three Single-Coil Pickups

SSS uses single-coil pickups at the bridge, middle, and neck positions. It is commonly paired with a five-way selector and is associated with clear attack and strong note definition.

Conventional single-coil pickups may reproduce some electromagnetic hum, particularly when used individually. This expected pickup behavior should be distinguished from excessive grounding noise, intermittent output or faulty wiring.

HSS: Bridge Humbucker with Two Single Coils

HSS combines a humbucker at the bridge with single-coil pickups in the middle and neck positions. It provides a practical balance between higher-output bridge sounds and the clearer response associated with single-coil positions.

Some suppliers write the same physical arrangement as SSH when listing pickups from neck to bridge. To avoid ambiguity, the specification should name each physical position:

• Bridge: humbucker
• Middle: single coil
• Neck: single coil

The SST-300 uses this bridge-humbucker, middle-single, and neck-single arrangement with a five-way selector.

HH: Two Humbucking Pickups

HH uses humbuckers in both the bridge and neck positions. It is commonly paired with a three-way selector for bridge, bridge-and-neck, and neck pickup combinations.

This configuration is often selected for buyers wanting a simpler control system, reduced conventional single-coil hum, and a clearly differentiated alternative to an HSS model. The STE-300 uses an HH configuration with one volume, one tone, and a three-way selector.

HSH: Two Humbuckers with a Middle Single Coil

HSH combines bridge and neck humbuckers with a middle single-coil pickup. It can support a broad range of pickup combinations but normally requires a more detailed switching specification.

Availability depends on the selected model. If coil splitting, series/parallel wiring, or special selector functions are required, the complete wiring diagram should be approved before sampling.

Pickup layout alone does not define output or sound. Magnet type, winding, pickup height, potentiometers, capacitor values, wiring, and amplifier settings also influence the final result.

Define the Selector and Control Circuit

A pickup count does not fully describe an electric guitar’s electronics. Buyers should confirm what each switch position and control actually does.

Five-Way HSS Circuit

A conventional HSS five-way circuit can provide five pickup combinations, but the exact wiring may vary. The bridge humbucker may remain in full humbucking mode or be coil-split in a combined position if the circuit is designed for that function.

The approved specification should record:

• The pickup activated in each selector position
• Whether any humbucker position uses coil splitting
• Which pickups are controlled by the tone control
• Volume and tone potentiometer values where required
• Capacitor value where required
• Output jack type and location

Three-Way HH Circuit

A typical HH three-way selector provides:

1. Bridge humbucker
2. Bridge and neck humbuckers together
3. Neck humbucker

The number of volume and tone controls must still be specified. An HH guitar with one volume and one tone uses a different operating layout from a model with two volumes and two tones.

Optional Switching Functions

Model-dependent circuits may include coil split, coil tap, phase switching, or series/parallel operation. These functions should not be assumed from the appearance of a push-pull knob. Each switch position and control function should be included in the approved wiring diagram.

Choose the Bridge for Setup and Service Requirements

The bridge influences string anchoring, intonation adjustment, tuning behavior, and routine maintenance.

Tremolo or Vibrato Bridge

A tremolo-style bridge allows controlled pitch movement through the bridge arm. Its setup depends on the bridge design, spring configuration, string gauge, and whether the bridge is floating, decked, or blocked.

For repeatable bulk specifications, confirm:

• Bridge model or construction
• Number and position of springs
• Floating, decked or blocked setup
• Tremolo arm type and thread
• Saddle type and adjustment range
• Approved string gauge
• Target bridge angle where applicable

Changing the string gauge after sample approval can alter spring balance, bridge position, action, and intonation.

Fixed or Hardtail Bridge

A fixed bridge does not use a tremolo cavity or spring system. It is often considered for school and entry programs that prioritize straightforward setup and maintenance.

The bridge should still provide sufficient saddle adjustment for the selected scale and string gauge. String-through-body and top-loading designs should be identified separately where relevant.

Scale Length, Neck and Frets Determine Playing Feel

Body shape attracts attention, but neck geometry has a more direct effect on playing comfort and setup.

Terms such as “thin neck,” “fast neck,” and “comfortable neck” are subjective. A B2B specification is more useful when it includes actual neck thickness measurements, profile, nut width, radius, and scale length.

Electric Guitars for Schools and Training Programs

Electric guitars for schools should be selected around student level, lesson format, available amplifiers, routine maintenance, and replacement-part requirements.

Important education purchasing factors include:

• Manageable body weight and balanced strap position
• Consistent neck profile and nut width across the batch
• Smooth fret ends and functional nut slots
• Accessible truss-rod adjustment
• A common, replaceable string gauge
• Straightforward selector and control operation
• Common bridge and tuner components
• Stable output jacks and control knobs
• Clear model identification for future replacement orders

An HSS guitar can provide more pickup combinations for varied teaching material. An HH guitar with a three-way selector can provide simpler operation. Neither is automatically better; the appropriate platform depends on the course level and teaching requirements.

Where a tremolo bridge is included, schools should decide whether students need an operating tremolo system or whether a decked or fixed setup would simplify routine use.

Electric Guitar Specifications for Bulk Purchasing

Use the following fields when comparing wholesale electric guitars or preparing an OEM electric guitar brief.

Any component substitution should be confirmed against the approved specification, particularly for pickups, switches, potentiometers, output jacks, bridges and tuners.

Electric Guitar Sample Approval Points

Pickup and Selector Operation

Each selector position should activate the intended pickup or combination. The approved sample should establish the required output balance between positions and any coil-split or special switching functions.

Volume, Tone and Output Function

Volume and tone controls should operate across their usable range without intermittent signal loss or excessive crackling. The output jack should maintain a secure connection with the intended plug type.

Grounding, Shielding and Noise

Electrical approval should distinguish normal pickup characteristics from faults. Conventional single coils can produce electromagnetic hum, while loose grounding, poor connections or unsuitable shielding can create additional noise.

Testing conditions should remain consistent when comparing samples or batches, including the same cable, amplifier settings and electrical environment where practical.

Pickup Height

Pickup height affects output balance and string interaction. Measurements should identify both bass and treble sides and the position in which the string is held during measurement. The approved values may differ between single-coil and humbucking pickups.

Bridge, Action and Intonation

The approved string gauge, neck relief, action and bridge setup should be treated as one system. Each saddle needs sufficient adjustment range to set intonation for the specified scale and strings.

For tremolo-equipped models, the approved sample should also establish the bridge position, spring balance and tremolo-arm fit.

Frets and Nut Slots

Fret level, fret-end finish, and nut-slot function affect buzzing, bends, first-position comfort, and tuning response. These points are especially important for school and entry-level electric guitar programs.

Select Electric Guitar Cases by Body Shape

An electric guitar case should be selected using the exact body outline, overall length, body thickness, and headstock dimensions. An ST-style and T-style guitar may not fit the same shaped hard case even when their overall lengths are similar.

When adding instrument cases to an electric guitar program, provide the selected model or a complete dimensional drawing. Buyers should also confirm whether the case must accommodate a tremolo arm, strap, cable, and adjustment tools.

Define the Electric Guitar Platform Before Branding

A repeatable OEM electric guitar program begins with the technical platform. Confirm the body and neck construction, scale, radius, fret count, pickup layout, wiring diagram, control functions, bridge, tuners, strings, and setup before selecting finishes and visual branding.

After the technical configuration is established, model-dependent options may include the headstock or body logo, pickguard color, control knobs, inlays, finish, hardware color, gig bag, and product carton. Review private label musical instrument services for project and sampling requirements.

Buyers evaluating BeatBulk as a long-term sourcing partner can also learn more about BeatBulk.

Frequently Asked Questions

What do HSS and HH mean on an electric guitar?

H means humbucker and S means single-coil pickup. When written from bridge to neck, HSS means a bridge humbucker with middle and neck single coils. HH means one humbucker at the bridge and one at the neck.

Why is the SST-300 sometimes described as SSH rather than HSS?

The SST-300 has single coils at the neck and middle positions and a humbucker at the bridge. Written from neck to bridge, this becomes SSH. Written using the common bridge-to-neck convention, it is HSS. Naming the pickup in each physical position avoids confusion.

What is the difference between HSS and HH electric guitars?

HSS combines a bridge humbucker with two single coils and normally supports a broader range of pickup combinations. HH uses two humbuckers and is commonly paired with simpler three-way switching. Pickup construction and wiring still affect the final performance.

What is the difference between a three-way and five-way selector?

A three-way selector normally provides three pickup choices or combinations. A five-way selector provides five positions, but the exact pickup or coil used in each position depends on the wiring circuit. The number of positions alone does not define the complete electronics.

Does ST-style identify a particular guitar brand?

No. ST-style is used as a general description of a familiar double-cutaway solid-body platform. It does not indicate affiliation with a third-party brand. Private-label logos and headstock artwork are handled as separately approved design elements.

Does body wood alone determine an electric guitar’s sound?

No. Body and neck materials are part of the instrument, but pickups, wiring, scale length, bridge, strings, setup, and amplifier system also influence the final sound and playing response.

Which electric guitar configuration is suitable for schools?

Both HSS and HH models can be used in education programs. HSS provides more pickup combinations, while HH with a three-way selector can be easier to operate. Buyers should also compare body weight, neck dimensions, bridge type, fret condition, and component serviceability.

Can pickup or electronic components change between orders?

Pickup, switch, potentiometer, capacitor, and output-jack specifications should be recorded in the approved product specification. Any proposed component substitution should be confirmed before it is applied to a repeat order.

What should be included in an electric guitar RFQ?

Include the body platform and material, neck construction, scale, nut width, fingerboard radius, fret count, pickup layout, selector functions, control circuit, bridge, tuners, string gauge, setup target, finish, required accessories, quantity, and branding requirements.

Request a Wholesale Electric Guitar Quote

Send the model link or required body platform, pickup configuration, selector and control layout, scale and fret requirements, bridge type, setup expectations, quantity, branding requirements, and destination country.

BeatBulk will confirm suitable electric guitar models, available specifications, MOQ, sample arrangements, and quotation details for your wholesale, school, or private-label program.